To bad that both of the guys that had the most to do with the design of these two antennas are either semi-retired or retired and neither one are Hams. Wouldn't it be great if they were?
Paul -----Original Message----- From: Laryn Lohman [mailto:[EMAIL PROTECTED] Sent: Sunday, January 23, 2005 9:00 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: DB224 "Loop" Lengths for 145.110 Mhz? The distance from the top of the pole to the top dipole is not critical and could easily be moved up to get more room down below for more spacing. The dipoles need to work up against the pole for proper impedance but if the top of the top dipole is 3-4" down that should be OK. If you still run out of room at the bottom, the bottom dipole can be in the clamp area if it faces away from the clamps. Laryn K8TVZ Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
