I will let Dean reply to this one but when you call it tells you the phones
are taped.
I guess you are trying to air your half truths and this is not the place.
Why don't you call them and not air it on this list? Like I said you are not
a Man to hide behind a key BD.
Take it up off the list. I am sure the tape they have will not make you
sound to good. And besides the wrong info it says came from your controller
people why blast the folks who did help you this is just not right. Take it
some where and tell some one who will belive your BS!
We won't.
Russ, W3CH
----- Original Message -----
From: "David Robichaux" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<Repeater-Builder@yahoogroups.com>
Sent: Wednesday, January 26, 2005 4:31 PM
Subject: Re: [Repeater-Builder] Re: DB224
>
> >Good that you taped our conversations. A federal offense, you know,
> for not informing me that you were doing so. Play the tapes for the
> list so that they can hear you in person, for three weeks, repeatedly
> confirm that pin 24 was COR and that AUX Output 5 should be set to
> COR and Active High.
>
> On last Friday, you directed me to set AUX Out 5 to TXS and Active
> High. That didn't work either.
>
> On the "cheat sheet" you finally faxed to me on Monday, (after I
> threatened to send the repeater back to you and not pay you for it),
> you finally identified pin 25 as COR; pin 24 as TOR. On the program
> settings you were just as wrong as you were on the pin 24 COR. You
> indicated on your "cheat sheet" that the proper program settings for
> Operating Mode was "No". When I informed you that no such selection
> was available on the software you sent with the repeater, you said
> "that it was on your software" and to just set it to "Simplex". Wrong
> again. Simplex didn't work.
>
> "Duplex", the only other choice does work quite nicely, thank you.
>
> You also finally indicated, on your now famous, "cheat sheet" that in
> the program AUX Out 5 needed to be set to TOR and Active High and
> that it was AUX Out 6 that needed to be set COR and Active High. That
> was the first time you mentioned AUX Out 6. What you failed to
> indicate is that under the AUX tab of the Function Port Settings
> there is no AUX In/Out unless you designate AUX 6 In/Out as Output on
> the preceding tab labeled "AUX Select". (Comes as "Input" as default.
>
> So after all the driving back and forth to the repeater site for
> three weeks, (sometimes twice a day), and the countless calls to you
> and to Computer Automation Control, it finally works the way it
> should have the first time if you knew what you were doing and would
> be more interested in listening carefully to a question, thinking
> about the right answer and then giving the right answer the first
> time.
>
> Instead, because I "didn't buy the controller from us", I got what
> you read above.
>
> Play the tapes for all concerned. They will get a kick out of how a
> graduate EE, PE, GROL, Esq., ESPN can guess so wrong, so many times
> even with all of his training and claims to have commissioned "over
> 2,500 repeaters" while I contemplate whether what legal action would
> be appropriate.
>
> By the way. Where is the circulator that I paid $253.50 + shipping
> for and was to be shipped 1/12/05? (Kathy Cook's letter, dated 1/7/05)
> >
> >
> >---- Original Message ----
> >From: [EMAIL PROTECTED]
> >To: [EMAIL PROTECTED], Repeater-Builder@yahoogroups.com
> >Subject: Re: [Repeater-Builder] Re: DB224
> >Date: Wed, 26 Jan 2005 15:52:58 EST
> >
> >>Dave,
> >>Lets get the whole story out.
> >>You your self told me you bought the controller
> >>not from us! You said you got all the program info
> >>from them! You told me you got no help or support
> >>from them. I called you to ask how you made out.
> >>You told me that the repeater we sold you worked 100%
> >>But you could not get it to work with your controller.
> >>I faxed you over my cheat sheet and I even told you
> >>to send it here and I would hook it up for you at no charge.
> >>If you do not think any of this is true a reminder that
> >>all of our phones are taped. So let us tell the whole
> >>truth not a half truth or I can send out a wave file.
> >>I and the company all ways try to help when we can.
> >>In your case I should have told you if it is not in the
> >>repeater as ordered I can't help. Then I would not
> >>get my finger bit off for trying to help with a product
> >>we did not sell. Like I said you your self said the repeater worked
> >fine.
> >>The wait was that they gave you the wrong program info for hooking
> >there
> >>controller up to our repeater.
> >>Enough said. I would be darn careful before you put out
> >>any more half truth on a public list. For you could easy be made a
> >fool.
> >>Remember our phones have you on them.
> >>As for your wrong pin also a half truth as that came from the
> >controller
> >>folks as did the cable. It was my cheat sheet that was right. I will
> > take this
> >>off the list and write you direct.
> >>Dean Westbrook, EE, PE.
> >>Cook Towers, INC.
> >>
> >>
> >>
> >>
> >>__________________________________________________________
> >>Message transport security by GatewayDefender.com
> >>3:53:01 PM ET - 1/26/2005
> >>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
