According to my Micor manual, the TLD5953A PA Board is installed in the TLD1693E Contunuous Duty Power Amplifier on the 150.8 - 162 MHz frequency range.
Is this what you are looking for? Neil - WA6KLA wn1b8 wrote: > > I recently picked up a Micor Compa-Station exciter/PA. I know its > for 132-174 MHz. and I believe it to be a 100 watt PA deck, but I > can't seem to find what the duty cycle is. The PA board part number > is TLD5953A1093R. It has the 14 1/2" long Micor fins across the top > of the module. The module, with the fins, is 6" high. > > I know this isn't the 100% duty cycle configuration, but can it be > run at 100% if it has constant forced air cooling across the fins? > Also, the board appears to be the same for the 100 watt 100% > configuration. Is it possible to simply replant this board in the > larger chassis/heat sink? Assuming for a moment that I could find a > dead one. > > Any help and/or advice will be greatly appreciated. > > Scott Madison, WN1B > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/