I'd like to know more about what you are doing
I have a MCL mixer and attempted the same thing, but
using a cell phone in test mode (848.25MHz) as the LO
and a video modulator that outputs on channel 3
(61.75MHz?)for the IF. This was to achieve a 910MHz RF
out from the mixer.
It didn't work and I wonder if I was putting too much
power into the mixer from the cell phone - but I am
not sure because the cell phone turned off after I
connected the phone to the mixer and turned on the
transmitter... perhaps I need and attenuator pad of
3dB or better...
~Ben, KB9LFZ
--- DCFluX <[EMAIL PROTECTED]> wrote:
>
> I have a Circa 1982 Mini Circuits mixer, ZXM-2 but
> it seems it is not
> made anymore as MCL denies all knowledge of its
> existince. I was
> wondering if anyone had the spec sheet for it? It
> has three BNC
> connectors on in, "R" "I" "L" and is about 2" X
> 3/4". I was hoping I
> could run a 1GHz LO into it to hetrodyne a cable
> modulator to 1277.25
> for my up and coming ATV repeater project.
>
>
>
>
>
> Yahoo! Groups Links
>
>
> [EMAIL PROTECTED]
>
>
>
>
>
>
=====
-------------------------------------------------
~Ben, KB9LFZ
Got your radio on and "listening?"
Then KEY the radio and say that you are! LET US USE WHAT WE HAVE!!
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
