The CAT1000 has 8 outputs, pins 5,6,&7 are outputs 1,2,&3. Just connect to 3 other outputs ( ex. pins18,19,&20) and change the output statements in your macros to reflect the change. Do not use the same pins or you will have interaction between the two devices.
--- In Repeater-Builder@yahoogroups.com, "w9mwq" <[EMAIL PROTECTED]> wrote: > > I am in the process of hooking up the RLS1000 to my Cat1000B > Controller, but I also have a WX-200 hooked up to the system. The > instruction tells me to wire control lines 5,6, and 7 to J1 on the > Cat1000, but that is where I have control lines for the WX-200. > There is connections already made at 5 and 6, and 7 is open. Do I > piggy back them together? Or what should be done here? HELP. > > Thanks.... > > Mathew Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/