Hi David, There is time out timer, tail time and audio/tone level adjustments right on the repeater board. You could try no pl in the decode slot of the programing information and the desired signaling in the tx side. If you were using an external controller, tx signaling (sub tone or dcs) is simply set up as base station operation. You can email me direct if you need more detailed information. I'm an Authorized Kenwood Dealer. cheers, Skipp skipp025 at yahoo.com > "drwoolweaver" <[EMAIL PROTECTED]> wrote: > > I recently acquired a TKR-820. Is it possible to program repeater to > encode on COS? Is there a time out timer adjustment? I saw a note > about time out alarm, but nothing about timer adjustment. Thanks in > advance. David Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/