Quickly learned to slather it (or similar) on NMO antenna mounts -- O-rings, lock-nuts, springs, whip-set-screws -- anything threaded that might need to come apart; years later -- vehicles looked like he77, mounts like new. Surprising little rusting around the hole, too. DC-to-daylight... Good stuff, Maynard. ;-) ~/ RSG /~
n8sac wrote: .I have also used in PL-256 Conections for years in Ham Radio on all bands Some say not to use above VHF but I haven't had any problems. Is bether than getting water in conection as water will not displace this Grease. My vote is this Grease is almost as good as SEX if I could remimber what it was like. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/