Has the exciter been aligned? You'll get no RF output if it is way out of
alignment.
Chuck
WB2EDV
----- Original Message -----
From: "NĜATH" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Friday, May 13, 2005 8:13 PM
Subject: Re: [Repeater-Builder] (unknown)mastr II exciter
Ok & Thanks All - I have Pin 8 grounded to the Icon ( was already according
to Simpson 260) The
control head has been removed - We do have a GE test set hooked up with good
microphone. The vol.
and squelch controls are inside the chassis like the NHRC. We are grounding
pin 25 for ptt and it kills
the spkr but no RF output. - Same occurrence with the remote microphone. We
have two transmitter
strips that were both supposed to be from working radios. Same with either
strip. I know there is a
( Friday 13th ) very small issue somewhere we have overlooked. We are
working on this primarily to
learn a bit more about the Mastr II's and let me say - it is sure a learning
experience as we have called on
brain cells that haven't been disturbed for over a quarter century. Dave &
Kenny's - GE Project
NĜATH / WĜOLY
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
