Steve, I use the same radios as links as well. I turn them down to 8-10wt but no lower than that since they can get unstable.
Mike Oregon Repeater Linking Group Mike Mullarkey 6539 E Street Springfield, OR 97478 [EMAIL PROTECTED] www.orlg.org -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Steven Passmore, kf6fkk Sent: Wednesday, May 25, 2005 1:47 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Maxtrac, 25w to 2w Anyone know if it's possible to mod a 25w UHF Maxtrac PA to the 2w version? Can the final be removed/bypassed so just the driver is being used? I'd like to use it for a link but the darn thing folds back the power output after about a minute of TX no matter where I set the power level at in the RSS. Thanks, Steve, kf6fkk Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/