Is the 12.46 that you are coming up with, the xtal inside of the transmitter itself. I'm looking, there is a repeater near here that is right around 158 megs, I'm looking it up now.
Mathew
Dave VanHorn <[EMAIL PROTECTED]> wrote:
At 02:47 PM 7/6/2005, Bob Dengler wrote:
>At 7/6/2005 12:26 PM, you wrote:
> >No - 157.870 IS the correct mix to combine with 145.410 and end up on
> >132.950 MHz - do the math again. The difference is 12.460 MHz.
> >
> >145.410 - 12.46 = 132.950
> >145.410 + 12.46 = 157.870
> >
> >Joe M.
>
>OK, 12.46 is the difference between the actual spur & Mathew's output, &
>12.1175 is the xtal freq.
It's in the neighborhood of 455kC off, but right on that.
Aero radios don't use some whacky IF do they?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Mail
Stay connected, organized, and protected. Take the tour
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
