Paul,
You need to decode the ID number –
not the Model number – on this particular info tag to determine just what
you have. If what little knowledge of Motorola serves me, I can tell you
it is a VHF high-power model (approx. 100W)…
T73KXJ --- T
= Trunk-mount
7 = high-power
3 = VHF
KXJ = Syntor X 9000 Conventional
The final digits are specific to the
individual radio, and are option codes…
See this link for more info: http://www.open.org/~blenderm/syntorx/#modqloc
Mark – N9WYS
From:
Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Paul Finch
Sent: Monday, November 07, 2005
9:27 PM
To:
Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder]
Micor 412.XXXX repeater and Syntor X mobile
Hello
again,
There is very little on that site about the "T99" Syntor X
radio. They do give a picture:
A Syntor X mobile
No, there never was a Syntor XX - the logo is supposed to be a single X with a
dropped shadow, but... there were "X" series (conventional) radios,
"X2" dual mode (trunked and conventional) and "X3"
(trunking only) 800MHz models.
-----Original Message-----
From: Repeater-Builder@yahoogroups.com
[mailto:Repeater-Builder@yahoogroups.com]On
Behalf Of Mark A. Holman
Sent: Monday, November 07, 2005 9:06 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Micor 412.XXXX repeater and Syntor X
mobile
there is a web site that has the rosetta stone of info. its
http://www.repeater-builder.com/motorola/motorola-suffixes.html
Mike Morris put it on the repeater builder web site
mark ab8ru
Paul Finch wrote:
>Hello,
>
>Can someone ID a Syntor Radio for me? The model is T99KX+037W with
what
>looks to be a FCC I?D of T73KXJ7304BK. What the heck is a T99xxxxxxx?
>
>What if anything are these radios worth. My estimate is not much.
>
>There is also a couple of Micor repeaters on 412/413.XXXX MHz, these things
>could go to the Ham link frequencies but not much else without mods.
There
>are two Micors, one is clean and the other has moderate water damage.
>
>Found a guy with a bunch of junk that he wants to sell.
>
>Paul
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
YAHOO! GROUPS LINKS