At 05:30 PM 12/2/2005 -0500, you wrote: >Shouldn't the touch tone pad tone be set at the maximum deviation or >nearly so?
<---I've always found around 3 Khz to be the correct point for most decoders/controllers. You mileage may, of course, vary. Those are steady and not subject to peaks. Also I take >it the max deviation should be set with a 1Khz audio tone applied> <--Best to check with the manufacturer's spec, although most I know of spec a 1 Khz tone, yep. Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of state-of-the-art repeater controllers and accessories. http://www.ah6le.net/arcom/index.html We offer complete Kenwood TKR repeater packages! We are now an authorized Telewave Dealer! AH6LE/R - IRLP Node 3000 http://www.irlp.net Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/