TT should be between 3 and 4 kHz deviation. (preferably closer to 3) Joe M.
Charles Greene wrote: > > Ken, > > Shouldn't the touch tone pad tone be set at the maximum deviation or > nearly so? Those are steady and not subject to peaks. Also I take > it the max deviation should be set with a 1Khz audio tone applied> > > 73, Chas W1CG > > At 05:05 PM 12/2/2005, you wrote: > >One thing that hasn't been mentioned so far, and one thing that is quite > >important, is that regardless of the suggestion of 5 or 4.75 Khz, it must > >be noted that these are PEAK values, not average. > > > >If the average deviation is set for 5 KHz, then the peaks will be > >absolutely be more than 5 Khz. > > > >So use the scope in the service monitor, not the meter > > > >Ken > >------------------------------------------------------------------------------ > >President and CTO - Arcom Communications > >Makers of state-of-the-art repeater controllers and accessories. > >http://www.ah6le.net/arcom/index.html > >We offer complete Kenwood TKR repeater packages! > >We are now an authorized Telewave Dealer! > >AH6LE/R - IRLP Node 3000 > >http://www.irlp.net > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/