Thanks Jeff for taking the time to do some pretty detailed research. The results seem right in line.
In real life the effective sensitivity will be somewhat less due to external noise sources. I usually will terminate a system into a dummy load and take a relative isolated tee measurement, then replace the load with the antenna system at the site, and see how much noise degradation occurs. This test will also reve3al noisy antennas and other noise sources. Best 73, Steve NU5D -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Jeff DePolo WN3A Sent: Saturday, February 11, 2006 9:50 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] UHF Power OK, here are the results of my quick bench measurements for whatever it's worth. All receivers were on the same frequency (448.800 MHz). Signal -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date: 2/10/2006 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
