You should make the cable 11-12 inches long, like the manual says. I made mine 6 inches before looking at the manual or the chassis - way too short. Now I have to take it all apart and do it all over again. #22 or #24 stranded wire is fine.
Bob M. ====== --- N9WYS <[EMAIL PROTECTED]> wrote: > Thanks for that information, Eric! > > It's nice to know that the plug is still available > from Motorola parts. > > Mark - N9WYS > > -----Original Message----- > From: Repeater-Builder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf > Of Eric Lemmon > Sent: Saturday, March 04, 2006 11:32 AM > To: Repeater-Builder@yahoogroups.com > Subject: RE: [Repeater-Builder] Cable > > Or, you could just buy the 7-pin plug from Motorola > Parts. It's part > #2884208B01, about $3 apiece. > > 73, Eric Lemmon WB6FLY __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/