If the Micor Power Supplies are either TPN1105A or TPN1106A yes,
the outputs are adjustable -
If not those model numbers, no, they can't be adjusted for
specific battery charging.
BTW, there are seven specific Micor Power Supplies by model number.
The two mentioned above, TPN1151A, TPN1152A, TPN1110A, TPN1110B
and the 12 VDC only version (I don't have the model number handy.)
Hope this helps,
Neil - WA6KLA
---- Original Message ----
From: [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] back-up battery charging
Date: Mon, 17 Apr 2006 22:51:56 -0400
>I am now in charge of some club repeater sites which use the
>standard Micor power supply. These have back-up batteries on them
which are
>being
>boiled dry by the 14.9V the power supply delivers,these supplies are
>not
>the battery back-up versions. I am looking for a good solution to
>solve
>this problem,maybe someone else has been there,done that??? Are there
>
>adjustments to set the voltage on these beasts? I thought about a
>relay,some big diodes,but it looks ugly... 73,Lee
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
