Re: [Repeater-Builder] back-up battery charging

[kb1chu]

here are the specs from the website  Specifications Maximum Voltage: 18 Volts DC Maximum Current: 40 Amperes Circuit: Diode OR-Gate Diodes: Two Schottky 80 Ampere, 20 Volt Voltage Drop: 0.25 Vdc at 1 Ampere 0.5 Vdc at 40 Ampere Charging Circuit: Charging regulator IC Field Effect Pass Transistor Schottky Diode Fuse switched for 1,4,7 or 10 Amperes (±5%) maximum Peak voltage limit: 13.8 (Gelled), 14.2 (AGM),(±2%) Peak voltage limit set via internal jumper to GELLED or AGM Peak voltage terminate point: 0.1 Maximum current Float Voltage: 13.5 volts (±2%) LEDs: Green - Indicates charger is "ON" Red - Indicates peak "PK" charge voltage Yellow - Indicates Float "FL" voltage Connectors: Anderson Powerpoles, 40A Size: 5.25 x 3.90 x 1.65 in, 13.4 x 9.9 x 4.2 cm Weight: 0.9 lbs, 0.4 kg Mounting Holes:: Two, 0.175 in. d, at a distance 4.875 in., for #8 hardware YAHOO! GROUPS LINKS  Visit your group "Repeater-Builder" on the web.    To unsubscribe from this group, send an email to:  [EMAIL PROTECTED]    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.