Re: [Repeater-Builder] Mastr III HB station

[Kevin Berlen, K9HX]

Thanks Steve, but that is not an option for us. It does not offer enough
functionality in our situation. We have a S-Com 7K that will be connected
to it. Thanks again,
Kevin, K9HX
At 09:21 PM 5/7/2006, you wrote:
I would very strongly (almost to
caps) recommend you use the built in controller inherent in the M3. 
You get hang time, time out timer, dtmf on/off, and morse id just by
programming.  We have had one in service , W5LM for 6 or 7 years
with one PA driver module failure.  Best luck,  Steve NU5D


 
On 5/7/06, Kevin Berlen, K9HX
<[EMAIL PROTECTED]> wrote: 


Our club has located a surplus Mastr III base station,

and I am looking for info on interfacing an external 

controller to it. TIA and 73,

Kevin, K9HX




Yahoo! Groups Links

<*> To visit your group on the web, go to:

  

http://groups.yahoo.com/group/Repeater-Builder/ 

<*> To unsubscribe from this group, send an email to:

  

[EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to: 

  

http://docs.yahoo.com/info/terms/




-- 
Ham Radio Spoken Here.....NU5D 




YAHOO! GROUPS LINKS 

 Visit your group
"
Repeater-Builder" on the web.
  
 To unsubscribe from this group, send an email to:

 
[EMAIL PROTECTED]
  
 Your use of Yahoo! Groups is subject to the
Yahoo! Terms of
Service. 
















  




  
  
  YAHOO! GROUPS LINKS



   Visit your group "Repeater-Builder" on the web. 
   To unsubscribe from this group, send an email to: [EMAIL PROTECTED] 
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.