Or downward on the pin in the upper hinge. Thatll work if the last guy in the cabinet didnt swing the toggle/handle over and under the hinge tabs... I never did that, just in case I forgot my own key! (Which Ive been known to do on occasion... <sheepish grin> )
Mark - N9WYS ________________________________________ From: Repeater-Builder@yahoogroups.com On Behalf Of Steve Bosshard (NU5D) Sent: Thursday, May 18, 2006 5:25 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] OT Need a GE Master Series Key If the station is in a stand up cabinet with hinges on the door, simply press upward on the pin on the bottom hinge, and the door will come un-hinged (works for GE and Moto Micor series at least). Else BF10A, or 1000GE Key - maybe one of the local folks will spare you one - I have seen camper shells and truck tool boxes use the same as BF10A or CH751 (common moto key). GL, Steve On 5/17/06, tgundo2003 <[EMAIL PROTECTED]> wrote: Hi All! I am working on a radio system for a local guy and his base station is a GE master seris model DI76EAU66A. The paperwork says its an 80 watt chassis, and its VHF. I need to get in to it to check things out (and blow out 30 years of dust) but were in moto country and I dont have any GE keys! Any one out there who can help before I get the drill? Thanks!! Tom W9SRV Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/