No, it shouldn't work at all. You need to re-align.
Chuck WB2EDV ----- Original Message ----- From: "n3gh_1" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, December 01, 2006 9:41 PM Subject: [Repeater-Builder] Micor Compa station converstion > Gentlemen, > Appreciate some direction. > I first connected a controller and tested this unit on it's original > frequency pair (460.625 Mhz +) successfully. Then I send the ICOM's > out for the new amateur frequency pair (443.050 +) Mhz. Upon getting > them back from Bomar in NJ I plugged them in and thought to run a > quick test. > Knowing I would have to realign the receiver and transmitter I still > thought it would work somewhat. I was Wrong!! > No transmitter output, no recieve. > First question is shouldn't the unit worked well enough to receive > some and transmit? > Second question is the manual I have describes the alignment procedure > using the Motorola test set only. Does anyone have test point > descriptions for use with general test equipment? (Scope, DMM, Counter) > Any help would be greatly appreciated. > Thanks > > N3GH > George > (W3BD repeater) > > > > > > > Yahoo! Groups Links > > > >
