That far away, not a chance. Remember - the unit is designed to reject out of band signals, and you're way out of the band it can see.
Joe M. n3gh_1 wrote: > > Gentlemen, > Appreciate some direction. > I first connected a controller and tested this unit on it's original > frequency pair (460.625 Mhz +) successfully. Then I send the ICOM's > out for the new amateur frequency pair (443.050 +) Mhz. Upon getting > them back from Bomar in NJ I plugged them in and thought to run a > quick test. > Knowing I would have to realign the receiver and transmitter I still > thought it would work somewhat. I was Wrong!! > No transmitter output, no recieve. > First question is shouldn't the unit worked well enough to receive > some and transmit? > Second question is the manual I have describes the alignment procedure > using the Motorola test set only. Does anyone have test point > descriptions for use with general test equipment? (Scope, DMM, Counter) > Any help would be greatly appreciated. > Thanks > > N3GH > George > (W3BD repeater) > > > Yahoo! Groups Links > > >
