Can you get aluminum sheet stock? Take it to a shop, roll it and weld. Or you can use square stock bent, but that's an additional weld per can. Or use large sheet stock and groove it for dividers that you place between sections. Looks like you're going to need to get creative.
Chuck WB2EDV ----- Original Message ----- From: "dave_g7uzn" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, December 24, 2006 11:27 AM Subject: [Repeater-Builder] Re: 6M cans still wanted in UK > Thanks for the link Chuck...I have seen it before but the irrigation > pipe is plastic in the UK! and to buy the raw materials new would > cost more than a second hand set INCLUDING shipping. > > Cheers Dave UZN > > > > > --- In Repeater-Builder@yahoogroups.com, "Chuck Kelsey" <[EMAIL PROTECTED]> > wrote: >> >> To be honest, finding surplus low band duplexers in the United > States is a >> challenge. Usually if you do find some cans, the owner will not > ship them. >> >> Here's a site showing how to make some full-sized cans. It's a lot > of work. >> >> http://www.bcarn.net/6m-project-duplexer.htm >> >> Chuck >> WB2EDV >> >> >> >> >> >> ----- Original Message ----- >> From: "dave_g7uzn" <[EMAIL PROTECTED]> >> To: <Repeater-Builder@yahoogroups.com> >> Sent: Sunday, December 24, 2006 5:49 AM >> Subject: [Repeater-Builder] 6M cans still wanted in UK >> >> >> > Come on lads there MUST be someone with a set of 6M cans willing > to >> > send them to London? I had a word with Santa but his sleigh is > full! >> > Have a great Christmas....Cheers Dave UZN >> > >> > >> > >> > >> > >> > >> > >> > Yahoo! Groups Links >> > >> > >> > >> > >> > > > > > > > > Yahoo! Groups Links > > >
