Take a look at the spec sheet for the elements. The mastr ii exec elements have selected capacitors for different frequencies. If the new frequency is enough of a change from the old frequency you will need to change them. Paul kb9wlc
--- Mathew Quaife <[EMAIL PROTECTED]> wrote: > Thanks Chuck, that is what they sent me, so your > math is just fine. Then there must be something I > am missing. I can take one of the old xtals and > they work out just fine, so I know the receivers are > working. Might I ask what the formula you used was? > It's been a long time since I have calculated a > crystal freq. so just need the formula > configuration. > > Mathew > > Chuck Kelsey <[EMAIL PROTECTED]> wrote: > If my hasty math is correct: > > 144.81 low side = 14.845555 > 144.81 high side = 17.334444 > > 434.875 low side = 16.39537 > 434.875 high side = 16.521296 > > Chuck > WB2EDV > > ----- Original Message ----- > From: "n9lv" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Monday, January 01, 2007 10:40 AM > Subject: [Repeater-Builder] Bowmar Crystals Ordered, > all the RX not working > for GE EXEC II mobiles > > > Hope someone can help shed some light here. I > ordered xtals from > > Bomar (3 week wait) for the GE EXEC II mobile > radios, 6 for RX for > > 144.810 and one RX of 434.875, all high side > injection. None of them > > are working at all. At the same time I ordered tx > xtals for the same > > radio, they all work just fine. What might I be > missing here, or did > > they just cut them all wrong. > > > > Mathew > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam > protection around > http://mail.yahoo.com __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com