So its up??? If so YAY! I need to get my GTX mobile programed..
If all the TI's repeaters are at the site, maybe its time to arcom it and forget it :) Roger White wrote: > > > I finally finished wiring in the CAT200 controller in my digital MSF5000 > tonight. Followed Bob, WA1MIK's directions in the website, the first > time I fired it up after modifying the codeplug for the external > controller, it talked to me! Was I excited. I sounded more like a > teenager than the 63 year old kid I am (today 63 BTW). > > Obviously, w/o Bob's many e-mail exchanges, I would not be at this > point. His instructions on the MSF page to modify the repeater for the > CAT controller are very easy to follow and he is to be commended along > with the rest of the repeater-builder hams whose info I have used > successfully. > > Back late last year, I started this journey, not inexperienced in > repeaters or this RF range (I am nearing retirement as a microwave > engineer at Raytheon here in Dallas), but i knew absolutely nothing > about rigs, repeaters, etc. on 900 MHz. I found this website and forum > thru Yahoo and a few months later, here I am. Looking back over the > journey, it was not hard at all, even for me. But Bob provided the > gentle guidance and prodding to get me where I am today. Hopefully, the > repeater will be up on the TI tower (antenna around 400 ft. high) in mid > February. > > Look for the W5RD/R DPL 432 on 927.1125 MHz if you come thru town. The > TI club also has repeaters on 145.43, 224.18 and 444.025 MHz on the same > tower. > > Roger W5RD > -- Jay Urish W5GM ARRL Life Member Denton County ARRL VEC N5ERS VP/Trustee Monitoring 444.850 PL-88.5
