SO what happens when you connect a larger power supply ?
>From: "Bill" <[EMAIL PROTECTED]> >Reply-To: Repeater-Builder@yahoogroups.com >To: Repeater-Builder@yahoogroups.com >Subject: [Repeater-Builder] Mastr II Station Power Supply Problem? >Date: Sun, 04 Feb 2007 22:01:14 -0000 > >I'm setting up a Mastr II VHF station for a 2 meter repeater and when I >got to the power amp to check everything I can only get about 86 watts >out of the 110watt PA. I noticed that the power supply starts to fold >over at about 20 watts out and when I get to 80 watts the supply is >only at around 8 to 9 volts. This Mastr II station has the PLL exciter >but they gave me a 4 transistor power amp the original amp was >missing. This is the newer type station with the IDA controller. I >looked up the model number of the supply and it's a PL19D430272G1 Rev 4 >which shows to be the right power supply for the station. I don't have >my spectrum analyzer at the moment so I can't tell if the power amp is >spurring although station metering shows below rated current on >transmit. Any clues? > >Bill... > > _________________________________________________________________ Advertisement: It's simple! Sell your car for just $20 at carsales.com.au http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Fsecure%2Dau%2Eimrworldwide%2Ecom%2Fcgi%2Dbin%2Fa%2Fci%5F450304%2Fet%5F2%2Fcg%5F801577%2Fpi%5F1005244%2Fai%5F838588&_t=757768878&_r=endtext_simple&_m=EXT
