Hi John,
The input to the ICOM compensation pin requires very little current, and
since there is already a 10 volt regulator in the MASTR II, it's easier
and cheaper to use two resistors.
Kevin
John wrote:
Kevin Custer wrote:
I'll post that text here, so you don't have to go to the article:
/There is one way to cheat if all you have is ECs. An EC will
maintain better than 5ppm from +32 degrees F to above 120 degrees F
only if you have a stable +5v DC voltage on the compensation line./
Kevin,
Would it be better to replace the 2 resistors with a small low current
TO-92 +5v regulator.
That will provide a more stable voltage and is smaller than 2 resistors.
Just my 2ยข
John