Dennis,

I have the same problem also. Did you place the filter between the antenna
and duplexer? I have mine installed between the RX and Duplexer. Depending
the WX I can hear the FM Station on my two meter repeater, but thought the
RF was getting into the cables, etc. I may have to switch the location of my
filter.

 

Thanks JIM  KA2AJH

 

 

 

  _____  

From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of numberone5call
Sent: Tuesday, February 13, 2007 9:26 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Ok, here's a weird one....

 

Ken;

I can only tell you what worked for myself and a friend w another 
repeater. Both repeaters were/are located on hi-power FM broadcast 
towers. Both FM broadcast radio transmissions cud barely be heard on 
the outputs of the repeaters (only when the rptrs were tx'n, under 
the tx audio). Both cases a dci bandpass filter eliminated the 
rebroadcast of the FM stations. 
This are both 2mtr repeaters. 
Hope this helps!!!

Dennis no5c
146.970 no5c/R pl100hz
444.500 w5LRG/R
Lauderdale Repeater Group w5LRG
Meridian, MS

--- In Repeater-Builder@ <mailto:Repeater-Builder%40yahoogroups.com>
yahoogroups.com, Ken Arck <[EMAIL PROTECTED]> wrote:
>
> Have a customer with the following issue:
> 
> Scenario: Amateur repeater (Mastr II) installed at a 100,000 FM 
radio 
> xmtr site.
> 
> Issue: Very low level audio of radio station appears on Mastr II's 
> xmtr (yes, external controller). Repeater owner hasn't fully 
> explained what "very low level" means. But regardless.....
> 
> Question: The only way I see this happening is due to some AM 
> component on radio station's transmitter.
> 
> Thoughts?
> 
> Ken
> ----------------------------------------------------------
-----------
> President and CTO - Arcom Communications
> Makers of the world famous RC210 Repeater Controller and 
accessories.
> http://www.arcomcon <http://www.arcomcontrollers.com/> trollers.com/
> Authorized Dealers for Kenwood and Telewave and
> we offer complete repeater packages!
> AH6LE/R - IRLP Node 3000
> http://www.irlp. <http://www.irlp.net> net
>

 

Reply via email to