I sell a repeater controller that can be put in a crossband mode. The controller normally has a repeater port and a remote base port. However, when put into crossband mode each port is to be connected to a transceiver and when it gets input on one it keys the other, typical crossband repeater. However, this sounds as if it is much more than what you need for it IDs, timeouts, remote control, etc. Same needed by a repeater. Really don't want to get into much here.
Since you are on site and sounds like single user simple get input key other rig with audio connected between rxs and txs. Many use dual band antennas with diplexers (crossband coupler) and it works fine. 73, ron, n9ee/r --- In Repeater-Builder@yahoogroups.com, "Jason Cato" <[EMAIL PROTECTED]> wrote: > > Can someone tell me what equipment I will need to cross band repeat a > Uniden SMU4525KT UHF into an Icom 2100H VHF? I want to be able to > move around my property with my H/T, and still be able to get into > repeaters my H/T can't reach. > > Also, can I use the same multi-band antenna for both at the same time > with a diplexer? Or would the VHF transmission kill the UHF > reception, or vice versa? >