Hi There, I'd contact them directly... they're very good at helping out. Try here... http://www.samlexamerica.com/customer_support/technical_service.htm
Their phone numbers are... Toll-free: 1-800-561-5885 Fax: 1-888-814-5210. Phone: 604-525-3836 Fax: 604-525-5221 They will help you... Shorty K6JSI --- In Repeater-Builder@yahoogroups.com, "Bob M." <[EMAIL PROTECTED]> wrote: > > Is anyone running a Samlex 12V supply in a situation > where they can measure the voltage regulation from > minimal load to something near half load? > > A friend has one of their 100A supplies (five 20A > units in one box) and he's seeing about 1V drop with a > 35A load (2M power amp), which is a bit more than I'd > feel comfortable with. I don't know how they connect > the supplies in parallel, so this could just be normal > drop through the combining network, if any. > > I can't find any specs regarding this on the Samlex > web site or in their manual for the SEC-1223. I would > hope the supply can hold the voltage to well within > 1%. > > For comparison, Astron RS35 supplies don't drop at > all, or if they do, it's under 0.1V, just losses in > the wiring. > > Thanks. > > Bob M. > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com >