If you are going to use a relay, simply use a set of the relay contacts to break the encode output line.
Chuck WB2EDV ----- Original Message ----- From: "Jim Cicirello" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Friday, January 11, 2008 9:25 PM Subject: [Repeater-Builder] NHRC-4 CONTROLLER AND TS-32 TONE BOARD > Hi Guys, > Another project and another question for you please. > I am installing a TS-32 on my UHF repeater. I followed the > instructions and the decode works OK. Now I want the Encode Output to > be active only when CAS is activated, so there is no ctcss present > when the tail is on. > I can't seem to find any logic points on the TS-32 where I can hook a > simple transistor and relay to cut the encode when the decode drops. > Any suggestions on how to accomplish this? > > 73 JIM KA2AJH > > > > > > > Yahoo! Groups Links > > > >