I second that.. Rick should be able to hook you up... Leon-N2HLT
--- On Fri, 12/19/08, Chuck Kelsey <wb2...@roadrunner.com> wrote: From: Chuck Kelsey <wb2...@roadrunner.com> Subject: Re: [Repeater-Builder] Teledyne relays To: Repeater-Builder@yahoogroups.com Date: Friday, December 19, 2008, 4:46 PM Try Rick Bowman http://www.amtronix .com/ Chuck WB2EDV ----- Original Message ----- From: "Scott Zimmerman" <n3...@repeater- builder.com> To: <Repeater-Builder@ yahoogroups. com> Sent: Friday, December 19, 2008 4:41 PM Subject: [Repeater-Builder] Teledyne relays > I'm looking for a few Teledyne 432YZ-7486 relays as replacements for some > that have burnt up in my HP-8920. Anyone have any leads? I was a good boy > and did my research homework with a search engine, but I haven't been able > to find any. I tried calling Teledyne, but apparently they split early on > Friday. (Got nothing but voice mail) > > A blown up '8920 input module would work too. I'm not above transplanting > parts from a donor board. > > BTW: When it says 200mW max on the antenna and duplex ports - IT MEANS > IT!!! > > Scott > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Rd > Boswell, PA 15531 > > > ------------ --------- --------- ------ > > > > Yahoo! Groups Links > > >
