Hello list dwellers, I went to our repeater site today and found the MASTRII PA dead. I could hear the exciter on my HT and the exciter output checked out OK at 250mw. There was good DC to the PA deck, but no current draw. I checked the usual suspects, the 2 buss wires that carry the DC, the RCA phone jack input, loose connections. etc. Nothing appeared to be bad. I pulled it out and put it on the bench and now it works. The major symptom was no current draw. I can't find a thing wrong at this point.
Any ideas? 73, Joe, K1ike ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) <*> To change settings via email: mailto:repeater-builder-dig...@yahoogroups.com mailto:repeater-builder-fullfeatu...@yahoogroups.com <*> To unsubscribe from this group, send an email to: repeater-builder-unsubscr...@yahoogroups.com <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/