Thank you for your tech advice. //30 LTC (IN) Spencer L. Gibbs USA ret. Indiana Guard Reserve Communications/Electronics Director Master Military Emergency Management Specialist Tel: 317 745 2134 Cell: 317 538 2636 email (see From: above) Hendricks County EC IDHS RACES 11 N9DVL 147.130- 88.5 PL/444.575+ 88.5PL "To every man there comes in his lifetime that special moment when he is tapped on the shoulder and offered the chance to do a very special thing. What a tragedy if that moment finds him unprepared and unqualified for the work which should be his finest hour." -Winston Spencer Churchill
--- On Thu, 5/7/09, Bob M. <msf5kg...@yahoo.com> wrote: From: Bob M. <msf5kg...@yahoo.com> Subject: Re: [Repeater-Builder] changing frequencies on GM 300 To: Repeater-Builder@yahoogroups.com Date: Thursday, May 7, 2009, 4:07 PM It's not feasible to replace the necessary components. There are probably 20-30 surface-mount capacitors plus some coils. The entire board should be swapped for one on the right band-split. You may also need to do something with the power amplifier as well. Bob M. ====== --- On Wed, 5/6/09, sixpe...@sbcglobal. net <sixpe...@sbcglobal. net> wrote: > From: sixpe...@sbcglobal. net <sixpe...@sbcglobal. net> > Subject: [Repeater-Builder] changing frequencies on GM 300 > To: Repeater-Builder@ yahoogroups. com > Date: Wednesday, May 6, 2009, 2:22 PM > What needs to be done to the RF board > to convert hle 8264a to hle 8300a?