Laryn, The combination number EX76KKS66A is your basic E-case VHF mobile radio, and the part number 19B233115G1 appears to be a box rather than a component.
Please advise the frequencies of the ICOMs, along with their positions in the radio. I suspect that you have an IMTS or MTS mobile telephone drawer, but the frequencies will provide valuable information. 73, Eric Lemmon WB6FLY -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Laryn Lohman Sent: Monday, May 25, 2009 8:05 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Help Identifying Matrix in Mastr II Hi all, I recently acquired an E case Mastr II VHF mobile with two receivers. Combination EX76KKS66A, KT74-A, ER64-A. It has a number of ICOMS plugged into each receiver, plus several more in the transmitter. Underneath an *extra high* (not flat) top cover is a ~4x6 in. box with several dozen feedthru caps on the side with same number of wires going to a board deep in the case. The number on the box is 19B233115G1. Inside the box are several ICs and a pin matrix with wires plugged onto some of them. I've searched the RB site for any reference to the above numbers with only the KT74 showing but no help. Does anyone have further info on this radio and what the box does? A scanning receiver(s) maybe? Thanks! Laryn K8TVZ
