Great, thanks James! Adam N2ACF
James Delancy wrote: > Receiver Squelch is just that ... a level at which the local receiver > un-squelches. The repeater squelch is the level the station uses to > determine (for its own internal controller) when it is actually going to > pass a signal through for repeat. I would recommend that you just set > both at the same level. The squelch knob on the front of the SSCB may > also affect your squelch levels depending on where you are deriving your > COR signaling. > > James > > > Adam Feuer wrote: > >> After interfacing my C74CXB to an external controller, everything seems >> to be playing real nice. In scrutinizing received signals, it seems as >> if the the MSF squelch is a little tight and not letting week signals >> become week but rather just squelching them out. >> >> The receiver is programmed for CTCSS decode so I would like to loosen >> the squelch a little. In the list of available EEpots, there are two >> settings that I'm not totally familiar with: "Repeater Squelch" and >> "Receiver Squelch". If someone could provide me an explanation of both >> as well as which one I should lower to help my issue, it would be >> greatly appreciated. >> >> Thanks! >> >> Adam N2ACF >> >> >> ------------------------------------ >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > >
