Doh! I'll take your word for it. I have a couple of KTH-1000's, and although most of my dies are also made by Kings, I have a few dies that aren't Kings, and I could have sworn they were Daniels but maybe I'm mis-remembering. Maybe they're Astro? I'll try to remember to check. Thanks for catching that.
--- Jeff WN3A > -----Original Message----- > From: Repeater-Builder@yahoogroups.com > [mailto:repeater-buil...@yahoogroups.com] On Behalf Of nj902 > Sent: Wednesday, July 22, 2009 10:54 PM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Re: crimping vs soldering & types > of coax connectors > > > > Jeff, > > What an excellent tutorial. This should be a permanent > article on the Repeater-buiilder site! > > Adding some pictures of the various crimp tools and the > crimping process would make it complete. > > BTW - for those looking to buy one of these tools - although > the Daniels HX4 and Kings KTH1000 crimpers look identical, > their dies do not interchange. > > wb0emu > > ---------------------------------------------------------- > > --- In Repeater-Builder@yahoogroups.com > <mailto:Repeater-Builder%40yahoogroups.com> , "Jeff DePolo" > <j...@...> wrote: > > "OK, here's probably more than you ever wanted to know about > crimp tools, crimp connectors, and how they work. ..." > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.392 / Virus Database: 270.13.21/2252 - Release > Date: 07/22/09 05:59:00 > > >