Don't you have to remove all the sockets and solder the ICs straight to the board?
On Fri, Oct 16, 2009 at 11:09 AM, Andrew Seybold <aseyb...@andrewseybold.com > wrote: > > > Open up the Wavetek, turn it on and look to at the LED on, I believe the > third module from the right, if it is flashing then the unit is unlocked, a > very common problem—made even more problematical since the IC’s and > components for this board are no longer in production, I have one also, and > know three others with the same problem, if anyone knows someone who has > come up with a fix please share. > > > > Andy W6AMS > > > > *From:* Repeater-Builder@yahoogroups.com [mailto: > repeater-buil...@yahoogroups.com] *On Behalf Of *bazelljr > *Sent:* Friday, October 16, 2009 8:18 AM > *To:* Repeater-Builder@yahoogroups.com > *Subject:* [Repeater-Builder] Wavetek 3000 > > > > > > Well, it happens. just turned on my wavetek 3000 Station monitor yesterday > & found it had gone South. > Everything works except does not send or receive RF. no doubt its in the > RF module.Yes it has Modules. Anyone have this Problem? Also Where cpould I > get it Repaired without Spending a Fortune? > > Wesley AB8KD > > > > >