mzfb2001 wrote: > I was looking in the files section and may have missed it, but I am looking > to improve the transmit audio quality on my UHF transmiter. I've noticed that > the audio is lacking in lows its not tinny but its not what I would call > normal audio from a Micor. The audio levels and on frequency adjustments have > made and to seem to be on the money. This is an unmodified repeater station > using stock cards and no controller. The receiver is stock and the frequency > has been changed to the 440mhz band. The audio coming out of the receiver has > fine audio quality. > Just looking for your thoughts or ideas. > Thanks for your input > Mike
I'd make sure the channel element is not limiting the quality of your audio. Consider doing a sweep of the frequency response at several deviation levels and see what you have. I've seen re-crystaled elements that were less than good. Kevin