I shall cut and past what I use for IRLP on my 2a .. it shall be in your box in a little bit !
Rick On Wed, Dec 16, 2009 at 2:05 PM, skipp025 <[email protected]> wrote: > > > Thank you to everyone who has already replied and > here's the equipment info as supplied by the club > member: > > [pasted text] > "It's an RLC-2a, an old and discontinued model from Link. > My issue is that I do not want the uhf link transmitter > to ID on its own. It should only ID when someone is talking. > To have the link transmitter on the mountain key and ID on > its own would make IRLP almost useless > [end pasted text] > > The mentioned port has a uhf radio (simplex) used for > IRLP in/out. > > thanks in advance to everyone for your input/help. > > skipp > > > "Bill Hudson" <w6...@...> wrote: > > Skipp > > > > Give us the model of the controller, the port he wants > > the ID to come out, if he wants it in voice or CW, and > > what the call sign should be. > > > > > > > > I can probably do it in 60 seconds, unless it's an old RLC-2. > > > > > > > > Bill Hudson > > > > W6CBS > > > > > > > > > > > > _____ > > > > From: [email protected]<Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected]<Repeater-Builder%40yahoogroups.com>] > On Behalf Of Rick Szajkowski > > Sent: Tuesday, December 15, 2009 4:08 PM > > To: [email protected]<Repeater-Builder%40yahoogroups.com> > > Subject: Re: [Repeater-Builder] Older RLC Controller Programming > Question. > > > > > > > > > > > > hay skipp you have helped me so much .. :) > > > > email me the model and I will fire you off some code > > > > rick > > > > On Tue, Dec 15, 2009 at 6:21 PM, skipp025 <skipp...@yahoo. > > <mailto:skipp...@...> com> wrote: > > > > > > > > re: Older RLC Controller Programming Question. > > > > A local ham club has a 2 meter repeater on port > > 1 and a uhf link radio (not duplex) on port 2. I > > don't use Link Controllers so I figured one of you > > here on the Group could save us a fair bit of time. > > > > Does someone with an older RLC Multi Port Controller > > have the simplex Tx ID programming information/examples > > they would be nice enough to share. Do you require > > the exact Controller Model or is the format for all > > their RLC Multi-Port Controllers the same format? > > > > We only need to add an ID on the second port used > > for the simplex uhf link. Programming examples and > > information for the 2nd port (only) would be much > > appreciated. > > > > thank you in advance for your replies. > > > > cheers, > > skipp > > > > skipp025 at yahoo.com > > > > [pasted text from Ham Club member requesting help] > > > > We have an older model RLC controller which doesn't have > > a user-friendly programming method. The trouble is putting > > an ID on the transmitter on the Mountain can be something > > of a pain because the controller only wants to send out > > ID's over radios that are configured in "repeater" mode. > > In "remote base" mode, the ID doesn't seem to want to work > > properly. > > > > >
