Okay all, looking for opinions. Our club is going to purchase a 220 amplifier and a 440 amplifier for our repeaters.
For 220, we're looking at either the TE Systems 2210RAN or the Henry C100B10R For UHF, it's either the TE Systems 4412RA or the Henry C100D30R. We have a Henry C300C30R in use for about 3-1/2 years now (running it at 250w output) on our 6-meter repeater and had to send it in about 13 months into its life to have the finals replaced. No problems since, though. I was pleased with Henry's response to the problem. Even though it was out of warranty, they fixed it under warranty. Though the TE systems amplifiers have more output (150w vs 100w), I have concerns about their reliability. The local D* repeater has had a lot of problems with their VHF amplifier, and it's not very clean (of course, that could be the fault of the D* repeater transmitter, too!). What are your opinions, TE Systems vs Henry? -- James Adkins, KB0NHX Vice-President -- Nixa Amateur Radio Club, Inc. (KC0LUN) www.nixahams.net Southern Missouri Assistant Frequency Coordinator - Missouri Repeater Council www.missourirepeater.org The Nixa Amateur Radio Club - "There is no charge for awesomeness!" (Well, only $1.00 per month)