RG214 is good for this and you can still find short pieces on e-bay. It is double shielded silver plated braid. Bill N4XIR. Sent from my Verizon Wireless BlackBerry
-----Original Message----- From: "George C" <geo...@dyb.com> Date: Thu, 24 Dec 2009 15:33:09 To: <Repeater-Builder@yahoogroups.com> Subject: [Repeater-Builder] Re: Can we tuning duplexer with this equipment? And those cables need to have very good shielding. I've found that with poorly shielded cables there can be enough leakage cable to cable to make measurements very innacurate. (I know, stop buying coax at Radio Shack...er...The Shack, etc) GeorgeC W2DB --- In Repeater-Builder@yahoogroups.com, "skipp025" <skipp...@...> wrote: > > If you have a decent radio with some type of receive signal > strength indicator, some coax cables a separate transmitter > radio (an HT would work) and some attenuator pads from Ebay... > you could do it. > > s. > > > > Azam <9w2www@> wrote: > > > > found this simple and cheap rf measurement kit at > > http://www.foxdelta.com/products/pm3.htm > > can it be use to tune a duplexer? > > > > rgds > > azam > > > > > > > > > > > > >
