I know Kenwood, Icom and Motorola on a open format.

  ----- Original Message ----- 
  From: Larry Horlick 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Thursday, March 25, 2010 10:51 AM
  Subject: Re: [Repeater-Builder] Re: opinions for a public safety repeater


    

  The digital side is Kenwood Nextedge, is it not? Does this mean that only 
Kenwood mobiles can be used?

  lh


  On Thu, Mar 25, 2010 at 10:47 AM, Jed Barton <j...@jedbarton.com> wrote:

      
    hmmm, tell me more about that one. Is that the combination analog /
    digital?
    Did the tkr750 go away? 

    -----Original Message-----
    From: Repeater-Builder@yahoogroups.com
    [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Maire-Radios
    Sent: Thursday, March 25, 2010 10:22 AM
    To: Repeater-Builder@yahoogroups.com
    Subject: Re: [Repeater-Builder] Re: opinions for a public safety repeater

    also there is the NXR-710 that replaces the TKR-750



    ----- Original Message ----- 
    From: Maire-Radios <mailto:maire-rad...@verizon.net> 
    To: Repeater-Builder@yahoogroups.com
    <mailto:Repeater-Builder@yahoogroups.com> 
    Sent: Thursday, March 25, 2010 9:56 AM
    Subject: Re: [Repeater-Builder] Re: opinions for a public safety
    repeater




    look at the new version of the TKR-740 the NXR-700 repeater it
    is the way to go and get the ver 2 software.

    John
    727-441-3250




    ----- Original Message ----- 
    From: skipp025 <mailto:skipp...@yahoo.com> 
    To: Repeater-Builder@yahoogroups.com
    <mailto:Repeater-Builder@yahoogroups.com> 
    Sent: Thursday, March 25, 2010 8:37 AM
    Subject: [Repeater-Builder] Re: opinions for a public safety
    repeater



    > "Jed Barton" <j...@...> wrote:
    > Hey guys,
    > Need some input here. I'm putting together a public safety

    > repeater for my local FD. It's going to be really simple. 
    > Given the reliability factor, we're going with a Kenwood. 
    > Here's the million dollar question, i need some input. How

    > about a kenwood tkr750 or a tkr740. I've run several 750s
    with
    > great results. I have not played with the 740, but i know
    it 
    > has an amazing receiver, but yet only pushes a few watts. 
    > Any suggestions for a good amp, perhaps Cresend i think it
    is.
    > Thanks,
    > Jed

    Hi Jed, 

    The Kenwood TKR-750 and TKR-740 are both great Repeaters.
    The 
    TKR-750 also has an amazing receiver. Proper setup of the
    receiver 
    should normally include the front end pre-selector alignment

    using a special coax cable jig assembly and a tracking
    generator
    properly configured and installed onto the PC-Board matching

    input and RF sample port/jack. 

    Most people and Dealers tend to do the more casual "peak for
    max 
    signal" method, which results in very usable but not the
    absolute 
    best sensitivity and performance. I'm very much amazed how
    many 
    repeaters we service with rather odd looking (on the test 
    equipment) "tweak and peak" front end alignment(s). So be
    sure to 
    ask any Dealer what and how they prepare your equipment
    before 
    they send it to you. 

    The TKR-750 is more of a self contained ready to use
    repeater 
    with a lot of built in features. Very popular for operations

    toward the 50 watt power level. 

    The TKR-740 is more of "system repeater" meaning... how many
    owners 
    often use them with external Power Amplifiers and
    Controllers. The 
    TKR-740 has much less power output and normal operation
    assumed by 
    most people is to include an external RF Power Amplifier. 

    If you need to bark higher than a 50 watt signal onto the
    air the 
    most popular method is to include (and use) an external RF
    Amplifier. 

    You can save quite a bit of serious money by using the same
    external 
    amplifier configuration with a TKR-750 Repeater and a higher
    drive 
    (input) level External Amplifier. There's nothing in stone
    about 
    driving an external high power RF Amplifier at the 25 to 50
    watt 
    level compared to spending a lot more money on a low drive
    level 
    amplifier. TPL, Cresend and TE can and will sell you higher
    drive 
    amplifiers for much less money and you end up with pretty
    much the 
    same end product. In the hopefully rare case where an
    external 
    amplifier might fail, continued repeater operation at the
    25-50 
    watt power level is quite usable versus the very low power
    output 
    of the 740 repeater. There can be different advantages to
    using 
    the TKR-750 or the TKR-740 Repeater.

    cheers, 
    skipp 

    skipp025 at yahoo.com 
    www.radiowrench.com 










  

Reply via email to