What model radio is this ? NIMS: 100 200 300 400 700 800 Arrl Extra Class VE HAZ MAT- A O sent from my blackberry mobile device
-----Original Message----- From: Duane Hall <du...@dheco.com> Sender: Repeater-Builder@yahoogroups.com Date: Thu, 22 Jul 2010 11:18:04 To: <Repeater-Builder@yahoogroups.com> Reply-To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Re: Icom OPC-617 Cable The solder jumpers D Data and F Flat only affect the freq response of the transmitted audio. A wrong setting wouldn't interfere with PTT. I think there was a drawing in the manual linked below, illustrating the locations. Are you grounding the PTT line and have reprogrammed the radio to allow external PTT? Regarding the speaker, are you getting the audio you need from the connector, but you want to disable the internal speaker? Maybe inserting a 3.5mm plug in the speaker connector on the back will mute the internal speaker. You could put a resistor inside the plug to provide a load. Duane AB8QU On 7/21/2010 9:13 PM, ryan_151 wrote: > I connected the OPC-617 as you said but i didnt solder the D or F bead and is > probly why it didnt work. when i recieve audio it comes out the little > speaker inside the radio and the PTT wont work to let me transmit. Im not > using any data so i guess i need to solder the "D" bead, is this Correct?? is > the D bead the jumper on the left side of the radio when the display is > pointing at you?? > > THANKS FOR YOUR HELP!!!