Im begining to beleive i need some sort of amplifier on my mic or intercom to make this work, Is this a possiblilty? if so where could a person get one? THANKS!!
--- In Repeater-Builder@yahoogroups.com, Duane Hall <du...@...> wrote: > > The solder jumpers D Data and F Flat only affect the freq response of > the transmitted audio. A wrong setting wouldn't interfere with PTT. I > think there was a drawing in the manual linked below, illustrating the > locations. > > Are you grounding the PTT line and have reprogrammed the radio to allow > external PTT? > > Regarding the speaker, are you getting the audio you need from the > connector, but you want to disable the internal speaker? Maybe inserting > a 3.5mm plug in the speaker connector on the back will mute the internal > speaker. You could put a resistor inside the plug to provide a load. > > Duane > AB8QU > > On 7/21/2010 9:13 PM, ryan_151 wrote: > > I connected the OPC-617 as you said but i didnt solder the D or F bead and > > is probly why it didnt work. when i recieve audio it comes out the little > > speaker inside the radio and the PTT wont work to let me transmit. Im not > > using any data so i guess i need to solder the "D" bead, is this Correct?? > > is the D bead the jumper on the left side of the radio when the display is > > pointing at you?? > > > > THANKS FOR YOUR HELP!!! >
