Are all the original cards in it when it was programmed? If it was programmed with any optional boards installed they must be in place at all times after. Also have you've added any cards after programming that will also cause this fail.
Ross kc7rjk From: w5rdw Sent: Tuesday, July 27, 2010 2:57 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] MTR 2000 Help I have a MTR 2000 for the 900 MHz band (hacked to the ham band). It has never been used as a repeater since I acquired it a few years ago, but was scheduled to be on my 927.1125 repeater freq. one of these days. I turned it ON after it had been OFF for a better part of a year (out in the garage but dry). It came on, but instead of the green LED staying lit after it warmed up, the 4 LEDs blinked for sometime and then the red LED (far left) stays lit. The manual says that means a major malfunction. Before I dig into the repeater, does anyone have an idea what has happened? I had just successfully reprogrammed it to a new freq. pair, but this situation has cropped up. Roger W5RDW Murphy, Texas
