I will take any advice, no matter what. I will look down in the innards
tomorrow! I remember when a cat decided to take up residence in my wife's car
years ago. It didn't stay long under the hood when she started the car one cold
morning! It kinda limped out of the garage!
Roger W5RDW
----- Original Message -----
From: Kevin King
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 27, 2010 7:35 PM
Subject: RE: [Repeater-Builder] MTR 2000 Help
Mouse corrosion?
------------------------------------------------------------------------------
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of w5rdw
Sent: Tuesday, July 27, 2010 5:58 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] MTR 2000 Help
I have a MTR 2000 for the 900 MHz band (hacked to the ham band). It has never
been used as a repeater since I acquired it a few years ago, but was scheduled
to be on my 927.1125 repeater freq. one of these days. I turned it ON after it
had been OFF for a better part of a year (out in the garage but dry). It came
on, but instead of the green LED staying lit after it warmed up, the 4 LEDs
blinked for sometime and then the red LED (far left) stays lit. The manual says
that means a major malfunction. Before I dig into the repeater, does anyone
have an idea what has happened? I had just successfully reprogrammed it to a
new freq. pair, but this situation has cropped up.
Roger W5RDW
Murphy, Texas
