Tim Sawyer wrote:
>
>
> It seems to pick up most of the page. Occasionally the beginning is
> missing or it will get just the very end. It always seems to drop at
> the same time as the page.
>
Does the repeater run CTCSS on the input? If so, is the behavior the
same if CTCSS is off? (CTCSS might clip the signal off at one end or the
other, even though the receiver is hearing the whole thing)
Can you hear the signal using a completely different receiver on the
same frequency at the site? (Preferably one that uses a different first
IF frequency, tests to see if it is getting into the IF or if the
intermod product is an image rather than the actual receive frequency)
Does it happen "out of the blue" with the repeater inactive, or only
when the repeater has been in-use? (Tests to see if the repeater
transmitter is part of the mix)
Does the paging sound exactly the same, or might you be hearing a link
transmitter? (many are on 72 MHz, exactly half your input frequency)
Matthew Kaufman
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Repeater-Builder/join
(Yahoo! ID required)
<*> To change settings via email:
repeater-builder-dig...@yahoogroups.com
repeater-builder-fullfeatu...@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
repeater-builder-unsubscr...@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
