No, I never, ever have heard any other audio. But there is time when I don't hear it at all... as if it takes two signals to occur.
-- Tim :wq On Aug 20, 2010, at 7:46 PM, MCH wrote: > Could be a spur. Can you hear any other audio with the page? (ever) > > Joe M. > > Tim Sawyer wrote: >> >> >> It seems to pick up most of the page. Occasionally the beginning is >> missing or it will get just the very end. It always seems to drop at the >> same time as the page. >> >> -- >> Tim >> :wq >> >> On Aug 20, 2010, at 4:38 PM, Chuck Kelsey wrote: >> >>> >>> >>> Does the entire page happen, or does it abruptly stop part way through >>> some >>> of the time? Partial page would indicate to me that another >>> transmitter is >>> in the mix and dropping before the pager does. >>> >>> However, I had a situation where there were four paging sites >>> scattered in >>> the county on the same frequency and one of the transmitters was spurious >>> and getting into my receiver. In that case, I always heard the entire >>> page, >>> but only when that particular transmitter came up. >>> >>> Chuck >>> WB2EDV >>> >>> ----- Original Message ----- >>> From: "Tim - WD6AWP" <tisaw...@gmail.com <mailto:tisawyer%40gmail.com>> >>> To: <Repeater-Builder@yahoogroups.com >>> <mailto:Repeater-Builder%40yahoogroups.com>> >>> Sent: Friday, August 20, 2010 7:27 PM >>> Subject: [Repeater-Builder] Re: Intermod Calculation >>> >>>> It occurs whether or not the repeater transmitter is keyed. >>>> >>>> --- In Repeater-Builder@yahoogroups.com >>> <mailto:Repeater-Builder%40yahoogroups.com>, "Jeff DePolo" <j...@...> >>> wrote: >>>>> >>>>> >>>>> Before we get into the math, an important question that needs to be >>>>> answered >>>>> is whether or not this mix occurs when your repeater transmitter is >>>>> unkeyed. >>>>> >>>>> >>>>> --- Jeff WN3A >>>>> >>>>>> -----Original Message----- >>>>>> From: Repeater-Builder@yahoogroups.com >>> <mailto:Repeater-Builder%40yahoogroups.com> >>>>>> [mailto:Repeater-Builder@yahoogroups.com >>> <mailto:Repeater-Builder%40yahoogroups.com>] On Behalf Of Tim Sawyer >>>>>> Sent: Friday, August 20, 2010 6:36 PM >>>>>> To: Repeater-Builder@yahoogroups.com >>> <mailto:Repeater-Builder%40yahoogroups.com> >>>>>> Subject: [Repeater-Builder] Intermod Calculation >>>>>> >>>>>> >>>>>> >>>>>> I have paging intermod from 157.740 Mhz. My receiver is on >>>>>> 144.540 Mhz. I'm 100% sure there is another transmitter >>>>>> involved in the mix because sometimes the pager is >>>>>> transmitting and I have no interference. >>>>>> >>>>>> I have an intermod calculator program but it wants all the >>>>>> known transmitters and the target receiver. But I need to >>>>>> solve for an unknown transmitter. Is there a way to calculate >>>>>> the other possible soruce(s)? >>>>>> -- >>>>>> Tim >>>>>> :wq >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>>> >>>> >>>> ------------------------------------ >>>> >>>> >>>> >>>> Yahoo! Groups Links >>>> >>>> >>>> >>> >>> ---------------------------------------------------------- >>> >>> No virus found in this incoming message. >>> Checked by AVG - www.avg.com <http://www.avg.com> >>> Version: 9.0.851 / Virus Database: 271.1.1/3084 - Release Date: 08/20/10 >>> 14:35:00 >>> >> >> >> >> > > > ------------------------------------ > > > > Yahoo! Groups Links > > >