Dear Chad, Chadvellacott: > Can Replicant run on the analogous Infrared-models (GT-P5113, > GT-P3113, even GT-N5113 if they made one) ? > [It looks like, on "Samsung Galaxy" devices, ##00 is to indicate WiFi > & cellular, ##10 WiFi-only, and ##13 WiFi & Infrared ("port", "blaster").]
I'm pretty sure that the GT-P3113 and GT-P5113 can run Replicant just fine. After having looked through our forum, it seems as though some Replicant users have already suggested that they've gotten it installed on their GT-PX113 devices, but I haven't seen anyone confirm that 6.0 runs on it. It'd be great to figure this out once and for all. I don't think there was a need for a GT-N5113 because there's an Infrared port on the GT-N5110: https://www.gsmarena.com/samsung_galaxy_note_8_0_wi_fi-5253.php I actually didn't know this until I just looked it up. Thanks for giving me the motivation to look into it! I must mention, for reasons of speed, performance, and the use of a 'not proprietary to Samsung' charging port, the GT-N5110 is suggested far and above the GT-P31XX and GT-P51XX models for daily drivers. Additionally, due to some new development work on the bootloader and kernel for the S3 and Note 2, the GT-N5110 has a much higher chance of getting an updated and mainlined bootloader and kernel since it is extremely similar to those two devices. It would take a fair bit of work for the GT-P31XX and GT-P51XX models to get such updates. > I found that you requested Infrared-models, among devices for you to > target:- > https://www.mail-archive.com/replicant@lists.osuosl.org/msg00883.html > > And your "installation"-pages seem to be for all Px1xx and N51xx:- > https://redmine.replicant.us/projects/replicant/wiki/GalaxyTab2Px1xxInstallation > > https://redmine.replicant.us/projects/replicant/wiki/GalaxyNote80N51xxInstallation > > > But for Supported Models, you only list the #100-models and > #110-models, here:- > https://redmine.replicant.us/projects/replicant/wiki/GalaxyTab270P31xx > https://redmine.replicant.us/projects/replicant/wiki/GalaxyTab2101P51xx > https://redmine.replicant.us/projects/replicant/wiki/GalaxyNote80N51xx Yeah, I'm pretty sure that we should update this to include the GT-P3113 and GT-P5113. > And if Replicant can basically run on Infrared-models too, then a > second question is, Does the Infrared work then? That's a good question. I have a GT-N5110 but might not have time to test this for a few days. Please remind me if I don't respond in 3 or 4 days. In the mean time, does anyone else here know? If it does work, it probably would be wise to add this information to this table: https://redmine.replicant.us/projects/replicant/wiki/ReplicantStatus#Replicant-60 > I am glad for such a libre system to be available for at least some > tablets and phones. > Thanks for supporting libre computing. We're glad too. You're very welcome. Thanks for your questions and support! > Sincerely, Chad. In Solidarity, kurtis Replicant Community Member _______________________________________________ Replicant mailing list Replicant@osuosl.org https://lists.osuosl.org/mailman/listinfo/replicant