On Fri, Dec 5, 2008 at 11:00 AM, FM <[EMAIL PROTECTED]> wrote: > Hello, > my FC switch cannot see the HBA connect to one of its port. > > hardware > HP Proliant DL 385 G2 > HBA : HP HPAE311A (Qlogic modele 2432) connected to a EVA 4000 > Firmware of HBA : 4.03.02 [IP] [Multi-ID] > OS : Redhat : 5.2 64 bits > > modprobe load the qla module. > > But all lights are flashing on the HBA (seems to mean firware firmware > init) and logs keeps telling me : > Dec 5 10:39:17 imola kernel: qla2xxx 0000:0b:00.0: LIP occured (f8f7). > Dec 5 10:39:17 imola kernel: qla2xxx 0000:0b:00.0: LIP reset occured > (f7f7). > > Any idea ?
Is the microcode concurrent/compatible with the SAN microcode? (same question of the "switch" in the middle) Are you loading the HP driver? (I would) _______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
